Accessorie Air Compressor Systems
Accessorie Air Compressor Systems
1858 N Case St.
Orange, CA 92865-4233
Phone: (714) 634-2292
Email: info@accessorieair.com
Website: www.accessorieair.com
Print Back
2001 63BSS x 63PB
Schematic
Unit of Measure
Items 2001 63BSS x 63PB
6215-2800-7
2001 63BSS x 63PB 		JGA 704FF Gun
JGA-510-704FF
JGA 704FF Gun
Manufacturer N/A Binks
N/A DeVilbiss
Gun Family N/A Conventional / Pressure-Feed Guns
Superior Stain Solutions N/A Consistently achieving the desired colors from varied types of wood is no small accomplishment. It requires knowledge, skill and the best equipment available.

Stain is used to establish the undertone color of nearly every piece of professionally finished wood product - and therefore making the staining process the single most critical process for achieving uniform overall finish.

The Binks and DeVilbiss spray guns below have been painstakingly selected as your very best equipment available for achieving optimum results in all your spray staining applications.
Spray Application Processes N/A Atomization Technology Options
  • Conventional Air Spray
    Quite simply. Conventional Air Spray uses lower volume at higher pressure (at the air cap.). Overall, this is the most commonly used spray finishing process in woodworking industries.

    Advantages: Conventional Air Spray offers the finest atomization available. Additionally, the operator has complete pattern control.
Fluid Delivery Options
  • Pressure-Feed
    This option (whether external or internal atomization uses an external pressure source (pressure tank, piston pump, or diaphragm pump] to force air and fluid from the spray gun nozzle. Air and fluid are then mixer) outside the nozzle.

    Advantages:     This method delivers higher volumes of fluids than Conventional Air Spray, and will spray a wider range of materials. It also enables independent control of air and fluid pressures.
Smart Sealer Stratergies N/A Sealers are used for sealing off areas on pieces of wood that are prone to soak up too much stain (like end grain). Failure to apply sealer at appropriate areas of pieces being sprayed can cause dark spots on the finished product.
Not all spray equipment is suitable for cost-efficient and top quality wood finishing. However, after decades of R&D, endless testing and engineering advancements, Binks and DeVilbiss guns and accessories clearly set the industry standards for excellence.
The equipment listed on this page has been designed, manufactured and field-tested to produce the highest quality finishes utilizing sealer applications.