Product Catalog

N/A Consistently achieving the desired colors from varied types of wood is no small accomplishment. It requires knowledge, skill and the best equipment available.

Stain is used to establish the undertone color of nearly every piece of professionally finished wood product - and therefore making the staining process the single most critical process for achieving uniform overall finish.

The Binks and DeVilbiss spray guns below have been painstakingly selected as your very best equipment available for achieving optimum results in all your spray staining applications.

N/A Atomization Technology Options

• Conventional Air Spray
  Quite simply. Conventional Air Spray uses lower volume at higher pressure (at the air cap.). Overall, this is the most commonly used spray finishing process in woodworking industries.
  
  Advantages: Conventional Air Spray offers the finest atomization available. Additionally, the operator has complete pattern control.

• Siphon-Feed
  Siphon-feed hookups (external atomization) use vacuum created at the nozzle to draw fluid from a cup.
  
  Advantages: Overall this is the lowest cost process in the industry, and requires minimal maintenance Additionally, this fluid cup system offers quick material / color changes.

N/A Sealers are used for sealing off areas on pieces of wood that are prone to soak up too much stain (like end grain). Failure to apply sealer at appropriate areas of pieces being sprayed can cause dark spots on the finished product.
Not all spray equipment is suitable for cost-efficient and top quality wood finishing. However, after decades of R&D, endless testing and engineering advancements, Binks and DeVilbiss guns and accessories clearly set the industry standards for excellence.
The equipment listed on this page has been designed, manufactured and field-tested to produce the highest quality finishes utilizing sealer applications.