Accessorie Air Compressor Systems
Accessorie Air Compressor Systems
1858 N Case St.
Orange, CA 92865-4233
Phone: (714) 634-2292
Email: info@accessorieair.com
Website: www.accessorieair.com
Print Back
Flow Capacities Maximum inlet flow capacities at various pressures:
To determine a dryer's inlet flow capacity at inlet pressures other than 100 psig, multiply the dryer's rated inlet flow (found in Table 1) by the multiplier from Table 2 that corresponds to the system pressure at the dryer inlet.
KAD Dew Point Options Meet ISO 8573.1 Air Quality Standards (Table 3)
Models KAD and KAD PS allow the user to select outlet pressure dew points corresponding to the four different ISO 8573.1 air quality classes.
KAD E models are preset to deliver the commonly used ISO 8573.1 Class 2 outlet pressure dew point.
Outlet flow capacities:
For dryers operating at less than maximum flow and using the Purge Economizer feature and/or operating at pressures other than 100 psig, contact factory for correct purge flow. -

Average Heater kW (fixed cycle) = (kW required to produce 280°F temperature rise) x (235 min. max heat time) / (240 min. drying time) Actual kW is normally much lower and proportional with the average annual water load presented to the dryer.
Unit of Measure

Specifications

Manufacturer

 N/A
Kaeser

Product Family

 N/A Desiccant Dryers

Series

 N/A KED

Inlet Flow at 100 psig 100ºF

 N/A 400 scfm

Width

 N/A 53 in.

Depth

 N/A 52 in.

Height

 N/A 104 in.

Connection Size (Inlet/Outlet)

 N/A 1 1/2 in.

Connection Type (Inlet/Outlet)

 N/A NPT

Weight

 N/A 1776 lbs

Purge Flow Rate

 N/A 28 scfm

Air Available Average

 N/A 372

Nom. Heater

 N/A 7 kW

Avg. Heater

 N/A 2.7 kW

Pre-Filter (KOR Series)

 N/A 625

High Temp After-Filter (HTA Series)

 N/A 600

Desiccant Per Tower

 N/A 354

Other Options

 N/A Dew point monitor High humidity alarm Insulation for heated desiccant air dryers NEMA 4 low ambient protection packages Parallel piped pre-filters and after-filters Stainless steel or copper pilot and instrument air tubing and fittings