Brands |
N/A Kaeser® |
Housing Model |
N/A F1060 |
Housing Type |
N/A Pressure Vessel with Full Access |
Filter Grades |
N/A KA (Adsorb) - Vapor KB (Basic) - Coalescing and Particulate KC (Cyclone) - Moisture Separator KD (Dust) - Particulate (Afterfilter) KE (Extra Fine) - Extra Coalescing and Particulate |
Initial Pressure Differential at Saturation of KC Filter |
N/A 1.5 psi |
Applications of KC Filter |
N/A Bulk Liquid Separation |
Initial Pressure Differential at Saturation of KB Filter |
N/A 2.0 psi |
Aerosol Content at Inlet of KB Filter |
N/A 10 mg/m³ |
Remaining Aerosol Content at Outlet as Per ISO 12500-1:06-2007 of KB Filter |
N/A < 0.1 mg/m³ |
Filter Medium of KB Filter |
N/A Deep Pleated with Support Structure and Polyester Drainage Fiber |
Applications of KB Filter |
N/A Aerosols Filters Solids Liquids Particulates |
Initial Pressure Differential at Saturation of KE Filter |
N/A < 2.9 psi |
Aerosol Content at Inlet of KE Filter |
N/A 10 mg/m³ |
Remaining Aerosol Content at Outlet as Per ISO 12500-1:06-2007 of KE Filter |
N/A < 0.01 mg/m³ |
Filter Medium of KE Filter |
N/A Deep Pleated with Support Structure and Polyester Drainage Fiber |
| Applications of KE Filter1 | N/A Aerosols Filters Solids Liquids Particulates |
| Initial Pressure Differential at Saturation of KD Filter2 | N/A < 0.5 psi |
Filter Medium of KD Filter |
N/A Deep Pleated with Support Structure |
Applications of KD Filter |
N/A Exclusively for Filtering Particulates |
| Initial Pressure Differential at Saturation of KA Filter3 | N/A 0.5 psi |
Filter Medium of KA Filter |
N/A High Efficiency Carbon Fiber |
Applications of KA Filter |
N/A Exclusively for Removing Oil Vapor |
Rated Flow |
N/A 3750 scfm |
Connection Size |
N/A 6 Inch |
Connection Type |
N/A Flange |
Maximum Working Pressure |
N/A 232 psig |
Maximum Temperature |
N/A 150 ºF |
Weight |
N/A 375 lb |
Why Treat Compressed Air |
N/A
Ambient air contains contaminants that are drawn into the compressor. These contaminants are concentrated during compression and can easily pass into the compressed air system. A typical compressed air system is contaminated with abrasive solid particles such as dirt, rust and pipe scale, compressor lubricants, condensed water droplets, and oil and hydrocarbon vapors. Contaminated compressed air systems increase operating costs by reducing efficiency. This results in damaged pneumatic equipment, higher maintenance and repair costs, reduced production (due to downtime), and increased product rejections. |
Meeting Your Air Quality Requirements |
N/A Properly sized and selected Kaeser® filters in conjunction with the appropriate dryer will remove harmful contaminants. This allows the compressed air system to deliver the quality of air required - whether it's plant, instrument, or breathing air. |
High Performance Filters and Separators |
N/A Engineered and developed using the latest innovations and manufacturing techniques, Kaeser® filter housings are designed with larger flow areas to ensure the lowest pressure drop and provide easier installation, operation, and maintenance. The result is consistent product quality with minimized operating costs. |
Key Features |
N/A
Deep Pleated Filter Elements Kaeser®'s KB, KD, and KE dust and coalescing filter elements feature deep pleated filter elements wrapped in stainless steel cages. The extra large surface area ensures superior filtration, increased efficiency, and reduced pressure drop. High Efficiency Carbon Matting Unlike the granular material used in many other filters, Kaeser®'s KA filters use carbon impregnated matting to prevent channeling while also reducing pressure drop. This highly absorptive matting is also effective at preventing particles from escaping. Minimized Pressure Losses The generously-sized connection flanges help keep pressure losses to an absolute minimum. Additionally, all particulate and coalescing filters (KB, KD, KE) come standard with a differential pressure gauge to check filter efficiency at a glance. Installation Flexibility The optional Eco-Drain can rotate 360º to fit any installation requirement. Drain access is never a problem even when installed in tight corners or against a wall. Superior Quality and Durability
|
Filter Accessories |
N/A
FDPS Sensor Filter differential pressure sensor with 4 to 20 mA output. Installation Kits The modular connection kit is available in multiple sizes for installation flexibility. The wall mounting kit includes all the necessary hardware for fast and easy mounting. |
Silicone-Free Certification |
N/A Silicone-free versions of Kaeser® filters are also available as an option. These filters are compliant with test standard PV-VW 3.10.7 and each one undergoes an individual coating test to confirm compliance. The supplied manufacturer's certificate attests that the product is silicone-free |
Proper Filter Sizing |
N/A To find the maximum flow for a filter size at pressures other than 100 psig, multiply the rated flow by the Correction Factor corresponding to the minimum pressure at the inlet of the filter. Do not select filters by pipe size. Use flow rate and operating pressure. |
Additional Information |
N/A
Multiple NPT Connection Sizes Threaded, modular connections for easy installation Compressed Air Inlet Optimized for air flow through housing to minimize pressure drop Filter Element Push-on element for easy maintenance Pressure Differential Indicator Standard on particulate and coalescing filters Compressed Air Outlet Filters maintain rated efficiency down to ten percent of flow capacity Safety Locking Screw Bleeds off pressure before allowing disassembly for increased safety Condensate Outlet Internal automatic condensate drain not shown |
